Pix :: Horizontal Stabilizer

Horizontal Stabilizer

11 images in this album.

[507x760] Jig for orienting, aligning and installing the HS. Viewed: 1064 times.	[507x760] HS Installation Jig Viewed: 921 times.	[570x380] HS Centerline Location/Alignment to Aircraft Centerline Viewed: 990 times.
[760x507] HS Cradle set at 0 degrees by factory in fastbuild. New incidence is -.6 degree. This created gap between cradle and HS @ TE. Viewed: 1417 times.	[570x380] HS-to_Cradle gap filled with flox during installation of the HS. Viewed: 953 times.	[570x380] Viewed: 925 times.
[570x380] HS Closeout Weights Viewed: 955 times.	[570x380] Checking Hinge Alignment Viewed: 995 times.	[360x540] HS Jig Viewed: 941 times.
[540x360] HS in Jig Viewed: 895 times.	[510x340] Trimming TE for Elevator Fitting Viewed: 1133 times.