Horizontal Stabilizer :: HS_InstallGap_1
View Images: normal | [full] Photo properties
Photo properties
Login
Login
Gallery: Pix navigate UP Album: Lancair Super ES navigate UP Album: Horizontal Stabilizer navigate UP (accesskey 'U')
Jig for orienting, aligning and installing the HS. HS Installation Jig HS Centerline Location/Alignment to Aircraft Centerline HS Cradle set at 0 degrees by factory in fastbuild. New incidence is -.6 degree. This created gap between cradle and HS @ TE. HS-to_Cradle gap filled with flox during installation of the HS. Trimming TE for Elevator Fitting
First Photo (Accesskey 'F') Previous Photo (Accesskey 'P') 4 of 11 Next Photo (Accesskey 'N') Last Photo (Accesskey 'L')
Jump to:
TL
HS Cradle set at 0 degrees by factory in fastbuild. New incidence is -.6 degree. This created gap between cradle and HS @ TE.
BB

HS Cradle set at 0 degrees by factory in fastbuild. New incidence is -.6 degree. This created gap between cradle and HS @ TE.

No votes
[Add comment]

Jig for orienting, aligning and installing the HS. HS Installation Jig HS Centerline Location/Alignment to Aircraft Centerline HS Cradle set at 0 degrees by factory in fastbuild. New incidence is -.6 degree. This created gap between cradle and HS @ TE. HS-to_Cradle gap filled with flox during installation of the HS. Trimming TE for Elevator Fitting
First Photo (Accesskey 'F') Previous Photo (Accesskey 'P') 4 of 11 Next Photo (Accesskey 'N') Last Photo (Accesskey 'L')
Jump to:
Gallery: Pix navigate UP Album: Lancair Super ES navigate UP Album: Horizontal Stabilizer navigate UP (accesskey 'U')
Powered by Gallery v1
RSS